Avantco 178HF20 Kullanıcı Kılavuzu - Sayfa 2

Dondurucu Avantco 178HF20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 178HF20 6 sayfaları. Chest freezer

User Manual

Installation

Important!!! Please Read Before Installation

• Make sure that the unit drops down to desired temperature before loading the unit with product.

• Make sure that there is proper ventilation around the unit in the area where it will operate.

• Please read through the manual in its entirety.

• Install the unit on strong and leveled surfaces

- Leveling can be obtained by adjusting the screws on the bottom of unit

- Unit may be noisy if surface is uneven

- Unit may malfunction if surface is uneven

• Install the unit in an indoor, well-ventilated area

- Unit performs more efficiently in a well-ventilated area

- For best performance, please maintain clearance of 4" on the back of the unit

- Outdoor use may cause decreased efficiency and damage to the unit

• Avoid installation in a high humidity and/or dusty area

- Humidity could cause unit to rust and decrease efficiency of the unit

- Dust collected on condenser coil will cause unit to malfunction.

- Malfunction due to dirty condenser will void warranty

• Select a location away from heat and moisture-generating equipment

- High ambient temperatures will cause the compressor to overwork, leading to higher energy bills and gradual

breakdown of the unit

- Malfunction due to high ambient temperature will void warranty

Electrical

• Please ensure that the required voltage of the compressor is being supplied at all times. Low or

high voltage can detrimentally affect the refrigeration unit.

• All units should be plugged into a grounded and properly-sized electrical outlet with appropriate

overcurrent protection. Please refer to the electrical requirements on the nameplate.

• Please make sure that your unit has its own dedicated outlet.

• Do not use an extension cord.

www.AvantcoRefrigeration.com

- 2 -