Makita 0088381898102 Kullanım Kılavuzu - Sayfa 10

Elektrikli Alet Makita 0088381898102 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 0088381898102 17 sayfaları.

Sayfayı Yazdır

Application mode

(Assist type displayed on panel)

Bolt mode (3)

: The lamp is on.

NOTE: When none of the lamp on the panel is lit, pull the switch trigger once before pressing the button

NOTE: All lamps on the switch panel go out when the tool is turned off to save the battery power. The type of the

application mode can be checked by pulling the switch trigger to the extent that the tool does not operate.

Full speed mode

► 1 . Button

2. Lamp

When full speed mode is turned on, the tool speed

becomes fastest even if you do not pull the switch trig-

ger fully. When full speed mode is turned off, the tool

speed increases as you increase the pressure on the

switch trigger.

To turn on full speed mode, press and hold the but-

ton

. To turn off full speed mode, press and hold the

button

again.

The lamp turns on while full speed mode is on.

NOTE: Full speed mode continues even after switch-

ing the impact force mode/auto stop mode.

ASSEMBLY

CAUTION:

Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

Selecting correct impact socket

Always use the correct size impact socket for bolts and

nuts. An incorrect size impact socket will result in inac-

curate and inconsistent fastening torque and/or damage

to the bolt or nut.

Clockwise

The tool stops automatically approxi-

mately 1 second later from the moment

that the tool has started impact blows.

Counterclockwise

The tool slows down the rotation after it

has loosened the bolt/nut.

Feature

Installing or removing impact socket

Optional accessory

CAUTION:

and the mounting portion are not damaged before

installing the impact socket.

CAUTION:

make sure that it is firmly secured. If it comes out,

do not use it.

NOTE: The way of impact socket installation varies

depending on the type of the square drive on the tool.

Tool with the ring spring

Model DTW300

For impact socket without O-ring and pin

► 1 . Impact socket 2. Square drive 3. Ring spring

Push the impact socket onto the square drive until it

locks into place.

To remove the impact socket, simply pull it off.

10 ENGLISH

Purpose

–

Make sure that the impact socket

After inserting the impact socket,