IKEA Strala Hızlı Başlangıç Kılavuzu - Sayfa 4

Aydınlatma Ekipmanları IKEA Strala için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. IKEA Strala 16 sayfaları. Light chain
Ayrıca IKEA Strala için: Kullanıcı Kılavuzu (12 sayfalar), Manuel (9 sayfalar), Talimatlar Kılavuzu (20 sayfalar), Manuel (13 sayfalar), Manuel (16 sayfalar), Manuel (20 sayfalar), Manuel (16 sayfalar), Manuel (32 sayfalar), Manuel (28 sayfalar), Manuel (20 sayfalar), Manuel (12 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Manuel (20 sayfalar), Manuel (20 sayfalar), Manuel (12 sayfalar), Manuel (24 sayfalar), Manuel (12 sayfalar), Manuel (20 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Manuel (13 sayfalar), Manuel (12 sayfalar), Manuel (12 sayfalar), Manuel (12 sayfalar), Manuel (16 sayfalar), Manuel (12 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar), Manuel (12 sayfalar), Manuel (36 sayfalar), Manuel (8 sayfalar), Manuel (12 sayfalar), Manuel (8 sayfalar), Manuel (12 sayfalar), Manuel (24 sayfalar), Talimatlar Kılavuzu (40 sayfalar), Manuel (24 sayfalar), Manuel (28 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar)

Sayfayı Yazdır

The flexible cable and lampholders:

is the cable in good condition?

is it free from cuts, fraying and dam-

age?

are the connections at each lamphold-

er sound?

are the lampholders free from cracks

or damage, that might give access to

the live cable or live contacts of the

lamps?

The lamps:

are they all in place, undamaged,

properly screwed or pushed in?

The plug/transformer

Check that the plug is not damaged.

Look for signs of overheating.

Check the fuse (if any), make sure it is

the correct rating.

IF ANY DOUBT, HAVE THE SET

CHECKED BY A QUALIFIED ELECTRI-

CIAN BEFORE USE OR SCRAP AND

PURCHASE A NEW SET.

Where the set is intended to be con-

nected to the supply via a 'plug-in

transformer', only use the transformer

supplied with the set. Otherwise if the

output voltage does not match the

voltage of the lamps overheating may

result.

Functional Tests

After the visual inspection and cor-

recting any faults found, including

tightening of lamps and replacement

of broken or missing lamps, plug in

and switch on the lamp set. Replace

any faulty lamps with ones of the

same voltage rating and manufacture,

check the box for details. Spare lamps

are usually provided with the set.

Lamps should not be removed or

installed with the supply on.

Only replace 'fused' lamps (some-

times identified by a white mark

on the glass) with identical 'fused'

lamps.

Installation on Christmas Tree

Christmas trees because of the pine

oils, and particularly after being in a

heated room for a week or two, are

very flammable. Tree decorations

may also be flammable and should

be kept clear of the lamps as far as

possible. Christmas trees should be

mounted securely so that they are un-

likely to fall over, or be knocked over

by children or pets. They must be kept

clear of heat sources, including spot

lamps and particularly CANDLES.

Take care when decorating the tree,

use a stepladder if the tree is tall and

wear shoes. Many more accidents

are caused by treading on plugs and

lamps in bare feet than faulty electri-

cal equipment.

ENGLISH

Guidance for Seasonal and Holiday

lighting sets.

Follow these and any other instruc-

tion provided by the manufacturer, it

is for your safety.

1. Install the lighting chains so that

there is easy access to the socket-out-

let so that the lights can be turned off

when you go out or go to bed. Never

leave lighting chains on when you go

out or go to bed.

2. Do not remove or insert lamps

while the lighting chain is connected

to the supply.

3. For series-connected lamps other

than those in sealed lighting chains,

replace failed lamps immediately by

lamps of the same rated voltage and

wattage to prevent overheating; this

AA-509734-1