Makita 1911B Kullanım Kılavuzu - Sayfa 5
Elektrikli Alet Makita 1911B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1911B 13 sayfaları. Power planer
Ayrıca Makita 1911B için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (16 sayfalar), Kullanım Kılavuzu (18 sayfalar), Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function on
the tool.
Adjusting depth of cut
001603
Depth of cut may be adjusted by simply turning the knob
on the front of the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and returns
to the "OFF" position when released.
For tool without lock button and lock-off button
004882
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For tool with lock button
004885
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button.
1. Knob
1
1. Switch trigger
1
1. Lock button /
Lock-off button
1
2. Switch trigger
2
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For tool with lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
ASSEMBLY
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the tool.
Removing or installing planer blades
001605
CAUTION:
Tighten the blade installation bolts carefully when
•
attaching the blades to the tool. A loose installation
bolt can be dangerous. Always check to see they
are tightened securely.
Handle the blades very carefully. Use gloves or
•
rags to protect your fingers or hands when
removing or installing the blades.
Use only the Makita wrench provided to remove or
•
install the blades. Failure to do so may result in
overtightening or insufficient tightening of the
installation bolts. This could cause an injury.
To remove the blades on the drum, unscrew the
installation bolts with the socket wrench. The drum cover
comes off together with the blades.
To install the blades, first clean out all chips or foreign
matter adhering to the drum or blades. Use blades of the
same
dimensions
oscillation/vibration will result, causing poor planing
action and, eventually, tool breakdown.
2
3
4
5
001606
5
1. Socket wrench
2. Installation bolt
1
2
and
weight,
or
1. Bolt
1
2. Drum
3. Planer blade
4. Drum cover
5. Adjust plate
drum