Makita 1923B Kullanım Kılavuzu - Sayfa 4
Elektrikli Alet Makita 1923B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1923B 17 sayfaları. 82 mm (3-1/4”)
Ayrıca Makita 1923B için: Kullanım Kılavuzu (13 sayfalar)
Sayfayı Yazdır
ADDITIONAL SAFETY RULES
1.
Rags, cloth, cord, string and the like should never be left around the work
2. Avoid cutting nails. Inspect for and remove all nails from the workpiece be-
3.
Handle the blades very carefully.
4. Be sure the blade installation bolts are securely tightened before operation.
5.
Hold the tool firmly with both hands.
6.
Keep hands away from rotating parts.
7.
Before using the tool on an actual workpiece, let it run for a while. Watch
for vibration or wobbling that could indicate poor installation or a poorly
balanced blade.
8.
Make sure the blade is not contacting the workpiece before the switch is
turned on.
9.
Wait until the blade attains
full
speed before cutting.
area.
fore operation.
IO.
Keep at least
200
m m
( 8 " )
away from the tool at all times.
1 1. Always switch off and wait for the blades t o come t o
a
complete stop be-
12.
Never stick your finger into the chip chute. Chute may jam when cutting
13. Do not leave the tool running. Operate the tool only when hand-held.
14.
When leaving the planer, switch off and set it with the front base up on a
15. Always change both blades or covers on the drum, otherwise the resulting
fore any adjusting.
damp wood. Clean out chips with a stick.
wooden block, so that the blades do not contact anything.
imbalance will cause vibration and shorten tool life.
SAVE THESE INSTRUCTIONS.
4