Makita 1923H Kullanım Kılavuzu - Sayfa 12

Elektrikli Alet Makita 1923H için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 1923H 17 sayfaları. Power planer
Ayrıca Makita 1923H için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (18 sayfalar)

Sayfayı Yazdır

1. Wing nut

2. Blade (A)

3. Blade (B)

4. Side (D)

5. Side (C)

1. Limit mark

1. Rear cover

2. Screwdriver

First, loosen the two wing nuts on the holder and insert the blades (A) and (B),

002589

so that they contact the sides (C) and (D). Then tighten the wing nuts.

Immerse the dressing stone in water for 2 or 3 minutes before sharpening.

002590

Hold the holder so that the both blades contact the dressing stone for simulta-

neous sharpening at the same angle.

Replacing carbon brushes

001145

Remove and check the carbon brushes regularly. Replace when they wear

down to the limit mark. Keep the carbon brushes clean and free to slip in the

holders. Both carbon brushes should be replaced at the same time. Use only

identical carbon brushes.

Use a screwdriver to remove the rear cover.

004904