Makita 2012NB Kullanım Kılavuzu - Sayfa 2
Elektrikli Alet Makita 2012NB için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 2012NB 13 sayfaları. Thicknesser
Ayrıca Makita 2012NB için: Kullanım Kılavuzu (14 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (17 sayfalar)
Sayfayı Yazdır
ENGLISH (Original instructions)
SPECIFICATIONS
Max. cutting depth
Feed rate (min
Table size (W x L)
No load speed (min
Overall length (W x L x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European Directive,
on
Waste
Equipment and its implementation in
accordance with national law, electric
equipment that have reached the end of
their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
SAFETY INSTRUCTIONS
WARNING! When using electric tools, basic safety
precautions, including the following, should always
be followed to reduce the risk of fire, electric shock
and personal injury. Read all these instructions
Model
Cutting width
-1
)
-1
)
Net weight
safety class
Electric
and
1.5 mm of stock width from 150 mm to 240 mm
1.0 mm of stock width from 240 mm to 304 mm
END201-7
before operating this product and save these
instructions.
For safe operations:
1.
Keep work area clean.
Cluttered areas and benches invite injuries.
2.
Consider work area environment.
Do not expose power tools to rain. Do not use
power tools in damp or wet locations. Keep work
area well lit. Do not use power tools where there is
risk to cause fire or explosion.
3.
Guard against electric shock.
Avoid body contact with earthed or grounded
Electronic
surfaces
refrigerators).
4.
Keep children away.
Do not let visitors touch the tool or extension cord.
All visitors should be kept away from work area.
5.
Store idle tools.
When not in use, tools should be stored in a dry,
ENE001-1
high or locked up place, out of reach of children.
6.
Do not force the tool.
It will do the job better and safer at the rate for
ENF002-2
which it was intended.
7.
Use the right tool.
Do not force small tools or attachments to do the
job of a heavy duty tool. Do not use tools for
purposes not intended; for example, do not use
circular saws to cut tree limbs or logs.
ENA001-2
8.
Dress properly.
Do not wear loose clothing or jewellery, they can
be caught in moving parts. Rubber gloves and
non-skid
working outdoors. Wear protecting hair covering to
contain long hair.
2
2012NB
304 mm
3.0 mm of stock width less than 150 mm
8.5 m
304 mm x 771 mm
8,500
(Only for Brazil 127V model)
483 mm x 771 mm x 401 mm
28.1 kg
/II
(e.g.
pipes,
footwear
are
10,000
radiators,
ranges,
recommended
when