Makita 3601B Kullanım Kılavuzu - Sayfa 7

Elektrikli Alet Makita 3601B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 3601B 13 sayfaları. Router
Ayrıca Makita 3601B için: Kullanım Kılavuzu (20 sayfalar), Kullanım Kılavuzu (13 sayfalar)

Sayfayı Yazdır

1. Wing bolt (B)

2. Wing bolt (A)

3. Straight guide

4. Guide bar

1. Base plate

2. Templet guide

Straight guide

005043

The straight guide is effectively used for straight cuts when chamfering or

grooving.

To install the straight guide, insert the guide bar into the holes in the tool base

005044

until the notch in the guide bar reaches just under the wing bolt (B). Then

tighten wing bolt (B). Loosen the wing bolt (A) and adjust the distance between

the bit and the straight guide. At the desired distance, tighten the wing bolt (A)

to secure the straight guide in place.

When cutting, move the tool with the straight guide flush with the side of the

workpiece.

Templet guide (Accessory)

005045

The templet guide provides a sleeve through which the bit passes, allowing

use of the tool with templet patterns.

To install the templet guide, screw the templet guide on the base plate.

005046