Avantco 189BVAC46HC Kullanıcı Kılavuzu - Sayfa 3
Merchandiser Avantco 189BVAC46HC için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 189BVAC46HC 7 sayfaları. Vertical open air merchandisers
Ayrıca Avantco 189BVAC46HC için: Kullanıcı Kılavuzu (10 sayfalar)
Sayfayı Yazdır
Installation
Please read this manual thoroughly prior to equipment set-up, operation, and maintenance.
This unit is intended for use in a temperature-controlled environment less than 75 º F and
55% relative humidity. Malfunction due to improper conditions is not covered under warranty.
Important!!! Please Read Before Installation
• If the unit has recently been transported on its side, please let the unit stand upright for a
minimum of 24 hours before plugging it in.
• Make sure the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
• Make sure all accessories are installed (shelves, shelf clips, etc.) before plugging in the unit.
• Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing / repair.
• Do not stand inside the unit.
• Please read through this manual in its entirety.
• This refrigerator is designed to perform in a temperature-controlled environment less than 75°F
and 55% relative humidity. The unit should be located away from doors, air ducts, and fans that
could disrupt airflow and negatively impact performance.
Cabinet Location Guides
• Install the unit on a strong and leveled surface.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
• Install the unit in an indoor, well-ventilated area away from doors, air ducts, and fans.
- For best performance, maintain 6" of clearance on the back of the unit at all times.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
• Avoid installation in a high-humidity and / or dusty area.
- High humidity can cause the unit to rust and may decrease efficiency.
- Dust collected on the condenser coil may cause unit to malfunction.
- Malfunction due to high ambient temperatures, humidity, or improperly maintained
condenser coil will void the warranty.
• Select a location away from heat and moisture-generating equipment.
- High ambient temperatures may cause the compressor to malfunction.
- Malfunction due to high ambient temperatures and humidity will void the warranty.
User Manual
- 3 -