Avantco 224BHAC63 Kullanıcı Kılavuzu - Sayfa 3

Merchandiser Avantco 224BHAC63 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco 224BHAC63 9 sayfaları.

Installation

Please read this manual thoroughly prior to equipment set-up, operation and maintenance.

This unit is intended for use in a temperature-controlled environment less than 75ºF and

relative humidity. Malfunction due to improper conditions is not covered under warranty.

Important!!! Please Read Before Installation

•

If the unit has recently been transported on its side, please let the unit stand upright for a

minimum of 24 hours before plugging it in.

•

Make sure the unit has reached the desired temperature before loading the unit with products.

This unit is meant for keeping cold products cold, not chilling warm products.

• Make sure all accessories are installed (shelves, shelf clips, etc...) before plugging in the unit.

•

Do not attempt to remove or repair any component of the unit. Consult an authorized service

technician for servicing / repair.

• Do not stand inside the unit.

• Please read through this manual in its entirety.

This refrigerator is designed to perform in a temperature-controlled environment less than 75°F

•

and 5 5 % relative humidity. The unit should be located away from doors, air ducts, and fans

that could disrupt airflow and negatively impact performance.

Cabinet Location Guides

• Install the unit on a strong and leveled surface.

- If the surface is uneven, the unit may be noisy.

- The unit may malfunction if the surface is uneven.

• Install the unit in an indoor, well ventilated area away from doors, air ducts, and fans.

- For best performance, maintain 6" of clearance on the back of the unit at all times.

- Do not use outdoors. For indoor use only.

- Avoid direct sunlight.

• Avoid installation in a high humidity and / or dusty area.

- High humidity can cause the unit to rust and may decrease efficiency.

- Dust collected on the condenser coil may cause unit to malfunction.

Malfunction due to high ambient temperatures, humidity, or improperly maintained

condenser coil will void the warranty.

• Select a location away from heat and moisture-generating equipment.

- High ambient temperatures may cause the compressor to malfunction.

- Malfunction due to high ambient temperatures and humidity will void the warranty.

User Manual

- 3 -