Avantco Equipment CFD10 Kullanıcı Kılavuzu - Sayfa 6

Mutfak Aletleri Avantco Equipment CFD10 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantco Equipment CFD10 10 sayfaları. Commercial

User Manual

Typical Operation Sequence

ACTION

Plug in your dehydrator

Flip power switch to "ON"

Turn diam to "ON"

Turn thermostat dial to "ON"

Timer reaches zero

Unload dehydrator

The timer has a range of 0 to 12 hours. If you need to reset the dehydrating time while the

dehydrator is in operation, simply turn the timer to a new position. The dehydrator will reset

the time according to the revised requirement without needing to be turned off.

When the set dehydrating time has been reached, the unit will alert you and the heating

elements/fan will shut off.

The temperature range of this unit is 85-160 degrees Fahrenheit on 120V models. This

thermostatic switch controls the temperature inside the dehydrator and helps to maintain the

proper temperature during various dehydrating applications.

RESULT

Power is connected and power light will go

on after turning the power switch "ON"

The power light will turn on and the unit will

be ready to operate

Convection fan will begin circulating air

Heating element will begin heating the unit

Timer indicates that products have finished

drying

Product will be dehydrated/hot; use caution

removing it from the dehydrator