Makita 4100NH2 Kullanım Kılavuzu - Sayfa 6

Elektrikli Alet Makita 4100NH2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4100NH2 12 sayfaları.
Ayrıca Makita 4100NH2 için: Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Makita 4100NH2 Kullanım Kılavuzu

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Adjusting the depth of cut
1
009555
Loosen the clamping nut on the depth guide and move
the base up or down. At the desired depth of cut, secure
the base by tightening the clamping nut.
CAUTION:
After adjusting the depth of cut, always tighten the
•
clamping nut securely.
Adjusting bevel angle
1
009567
Loosen the clamping nut on the bevel scale plate on the
front of the base. Set for the desired angle (0 - 45
degrees) by tilting accordingly, then tighten the clamping
nut with your hand securely.
Loosen the clamping nut on the depth guide and move
the base up or down. At the desired depth of cut, secure
the base by tightening the clamping nut.
009556
1. Base
2. Clamping nut
2
1. Clamping nut
1. Clamping nut
2. Base
1
2
CAUTION:
After adjusting the depth of cut, always tighten the
•
clamping nut securely.
Sighting
B
009559
For straight cuts, align A with your cutting line on the
workpiece. For 45° bevel cuts, align B with it.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
014268
For tool with lock button
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop. For continuous operation, pull
the switch trigger, push in the lock button and then
release the switch trigger. To stop the tool from the
locked position, pull the trigger fully, then release it.
For tool with lock-off button
To prevent the switch trigger from being accidentally
pulled, a lock-off button is provided.
To start the tool, depress the lock-off button and pull the
switch trigger. Release the switch trigger to stop.
CAUTION:
Do not pull the switch trigger hard without pressing
•
in the lock-off button. This can cause switch
breakage.
6
A
1. Switch trigger
1
2. Lock button /
Lock-off button
2