Makita 4131 Kullanım Kılavuzu - Sayfa 13

Elektrikli Alet Makita 4131 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4131 14 sayfaları. Metal cutter
Ayrıca Makita 4131 için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar)

MAINTENANCE

1. Limit mark

1. Screwdriver

2. Brush holder cap

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Inspecting saw blade

•

Check the blade carefully for cracks or damage before

and after each use. Replace a cracked or damaged

blade immediately.

•

Continuing to use a dull blade may cause a dangerous

kickback and/or motor overload. Replace with a new

blade as soon as it no longer cuts effectively.

•

Carbide-tipped saw blades for metal cutter cannot

be re-sharpened.

001145

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

005356

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, car-

bon brush inspection and replacement, any other mainte-

nance or adjustment should be performed by Makita

Authorized or Factory Service Centers, always using Makita

replacement parts.