Makita 4131 Kullanım Kılavuzu - Sayfa 6

Elektrikli Alet Makita 4131 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4131 12 sayfaları. Metal cutter
Ayrıca Makita 4131 için: Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (14 sayfalar), Kullanım Kılavuzu (12 sayfalar), Kullanım Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Switch action

CAUTION:

•

Before plugging in the tool, always check to see

that the switch trigger actuates properly and

returns to the "OFF" position when released.

For tool with lock-off button

► 1 . Switch trigger 2. Lock-off button

To prevent the switch trigger from being accidentally

pulled, a lock-off button is provided.

To start the tool, push in the lock-off button and pull the

switch trigger. Release the switch trigger to stop.

CAUTION:

•

Do not pull the switch trigger hard without press-

ing in the lock-off button. This can cause switch

breakage.

For tool without lock-off button

► 1 . Switch trigger

To start the tool, simply pull the switch trigger. Release

the switch trigger to stop.

ASSEMBLY

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Installing or removing saw blade

► 1 . Dust cover 2. Knob

► 1 . Hex wrench 2. Shaft lock

CAUTION:

•

Use only the Makita wrench provided to install

or remove the blade. Failure to do so may result

in overtightening or insufficient tightening of the

hex bolt. This could cause serious injury to the

operator.

•

Do not touch the blade with your bare hand

immediately after cutting, it may be extremely

hot and could burn your skin. Put on pair of

gloves when removing a hot blade.

To remove the blade, first push and turn the knob which

secures the dust cover clockwise to the

remove the dust cover. Press the shaft lock so that the

blade cannot revolve and use the hex wrench to loosen

the hex bolt counterclockwise. Then remove the outer

flange and blade.

To install the blade, follow the removal procedure in

reverse. Always install the blade so that the arrow on

the blade points in the same direction as the arrow on

the blade case.

BE SURE TO TIGHTEN THE HEX BOLT SECURELY.

6 ENGLISH

symbol and