FRIGOGLASS CL 950 WITHOUT CANOPY Kullanıcı Kılavuzu - Sayfa 8

Merchandiser FRIGOGLASS CL 950 WITHOUT CANOPY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. FRIGOGLASS CL 950 WITHOUT CANOPY 17 sayfaları. Ice cold merchandisers

Sayfayı Yazdır
ENG
FAULT
The ICM does
not work.
The ICM does
not cool
properly. The
products are
warm.
The ICM
sometimes
makes noise.
8
POSSIBLE REASONS
Power cord not plugged in.
No power coming through
the socket.
Wrong EMS set point
The ICM has recently been
reloaded with warm
products. It takes 11-18
hours to cool them down.
The ICM is loaded in such a
way that the air-circulation in
the interior is getting
blocked.
The condenser is blocked.
Dust has accumulated on the
condenser.
The door has been left open.
The door does not seal
properly.
Leakage in the cooling
system.
For this particular ice cold
merchandiser, a powerful
mechanism is needed and
consequently a certain
amount of noise cannot be
avoided.
Intense metallic noise.
Inclined or curved floor.
HANDLING
Plug it in.
Check for fuse on the mains
Lower the set point as follows:
Press the "set" button, then
keep the "down" button
pressed until the you reach
the desired value, and then
press the "set" button again.
Preferably, reload the ICM
before night closing.
Load the ICM according to the
standards you have been
provided with by the company.
Clean the condenser using a
vacuum cleaner.
Press the defrost button and
defrost manually.
Call a Service technician
Repair the leakage (this type
of repair should be performed
by an authorized technician)
Ice Cold Merchandisers are of
dynamic type, so a certain
amount of noise cannot be
avoided.
Call a Service technician
Level the ICM properly by
adjusting its feet.