CORNING CCH 1U Hızlı Başlangıç Kılavuzu - Sayfa 2
Ağ Donanımı CORNING CCH 1U için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. CORNING CCH 1U 6 sayfaları.
3.
aCCessing the housing
Open front and rear doors.
3a
Pull covers with moderate force
in opposite directions to remove.
Slide tray toward rear of housing.
3c
Press latches on both sides to release tray
and pull it completely out of housing.
Press here.
4.
installing Cable for field terMination
Warning: Never look directly into the end of a fiber that may be carrying laser light.
Laser light can be invisible and can damage your eyes. Viewing it directly does not cause pain.
the iris of the eye will not close involuntarily as when viewing a bright light. consequently,
serious damage to the retina of the eye is possible. Should accidental eye exposure to laser
light be suspected, arrange for an eye examination immediately.
4.1. Accessing the Cable for Field Termination
Strip Lengths for 1U, 2U, 3U Housings
CABLE
OSP, FREEDM
®
MIC
, UMIC Cable or Subunit
®
STANDARD RECOMMENDED PROCEDURE 003-876-QSG | ISSUE 2 | OctOber 2011 | PAGE 2 OF 6
Press here.
Strain-relief
Point
22 inches
22 inches
Lift plunger on internal strain-relief assembly.
3b
Push bracket to rear to disengage and remove
it from the housing.
Plunger
Set tray and strain-relief assembly on work
3d
surface for next operations.
Direct Termination
Fan-out body legs available
in 25 - 48 inches lengths
Strip to 48 inches for splicing
TPA-3875
TPA-3876