Makita 4329 Kullanım Kılavuzu - Sayfa 9
Elektrikli Alet Makita 4329 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 4329 13 sayfaları. Jig saw
Ayrıca Makita 4329 için: Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (13 sayfalar), Teknik Bilgiler (7 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (13 sayfalar)
Sayfayı Yazdır
Clean
cutting
operations
connecting this tool to a Makita vacuum cleaner. Insert
the hose of the vacuum cleaner into the hole at the rear
of the tool. Lower the dust cover before operation.
NOTE:
Dust extraction cannot be performed when making
•
bevel cuts.
Rip fence (optional accessory)
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before installing or removing accessories.
1.
Straight cuts
Steel base type
008096
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts.
Aluminum base type
008097
To install, insert the rip fence into the rectangular hole
on the side of the base with the fence guide facing
down. Slide the rip fence to the desired cutting width
position, then tighten the bolt to secure it.
Steel base type
2
3
002776
can
be
performed
1. Rip fence
(Guide rule)
1
1. Rip fence
(Guide rule)
1
1. Hex wrench
2. Bolt
3. Rip fence
1
(Guide rule)
4. Guide facing
4
by
Aluminum base type
1
2
005454
2.
Circular cuts
2
3
002777
Aluminum base type
4
005455
Steel base type
1
008098
Aluminum base type
1
008099
When cutting circles or arcs of 170 mm or less in
radius, install the rip fence as follows.
Insert the rip fence into the rectangular hole on the
side of the base with the fence guide facing up.
9
1. Bolt
2. Fence guide
3. Hex wrench
4. Rip fence
(Guide rule)
3
4
1. Treaded knob
Steel base type
2. Guide facing
3. Rip fence
(Guide rule)
4. Pin
1
4
1. Threaded knob
2. Pin
3. Rip fence
(Guide rule)
4. Fence guide
1
2
3
1. Rip fence
(Guide rule)
1. Rip fence
(Guide rule)