Bernina Large Freearm Embroidery Hoop Hızlı Başlangıç Kılavuzu
Dikiş Makinesi Aksesuarları Bernina Large Freearm Embroidery Hoop için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Bernina Large Freearm Embroidery Hoop 2 sayfaları.
Sayfayı Yazdır
1
I
H
G
F
BERNINA International AG | CH-8266 Steckborn Switzerland | www.bernina.com | © Copyright by BERNINA International AG
1066855.00A.04
2022-03 EN
Large Freearm Embroidery Hoop
A
B C
Information
Scope of delivery
• 1× Embroidery Hoop
• 1× Embroidery Template
• 2× Embroidery Template Holder
Purpose
• To embroider T-shirts, bags and long tubular fabric starting from a circum-
ference of 80 cm.
For your safety
E
D
Before using this accessory, please read this instruction manual as well as the
instruction manual of your machine carefully.
Overview
A Embroidery Template Holder
B Embroidery Template
C Outer line for embroidery field (only for BERNINA 5-Series)
D Twist Lock
E
Release Button
F
Inner Ring
G Outer Ring
H Embroidery Hoop Connector
I
Push button
Application
Preparing the Embroidery Hoop
> Attach the Template Holder to the Embroidery Template at the notches.
> Place the Embroidery Template in the inner ring.
> Before using the Embroidery Hoop for the first time, calibrate the
Embroidery Hoop in the Setup Program of the machine. Refer to the
instruction manual of the machine.
> Squeeze the Release Buttons underneath the Twist Lock.
– The locking mechanism is released.
> Remove the outer ring.
Hooping the fabric
> Mark the center of the embroidery motif on the fabric with a water-soluble
pen. For items with a closed seam, such as bags, make sure there is at least
7 cm of fabric from the inside left edge of the hoop to the closed seam.