GarageAce ET30 Kullanım Kılavuzu - Sayfa 14

Garaj Kapısı Açıcı GarageAce ET30 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GarageAce ET30 18 sayfaları. Rolling garage door opener

Please confirm the photocells are well connection and programmed. Please check if the door will be

automatically reversed when encountering an obstacle during door closing.

4.5.3 Canceling the photocell function:

Press 'DOWN' button and hold on until the LED displays 'H' , press 'DOWN' button the LED displays 11', to

cancel this function, press 'SET' to confirm. The default is close for this function.

to cancel this function. When setting is finished,

Press 'DOWN' button

Display 'H'

Press 'DOWN' button

Display '11'

Press 'SET' to confirm

WARNING: Close the photo beam function when not utilizing photo beam sensor.

4.6 Auto close setting:

Press 'UP' button and hold on until the LED displays '-'. Press 'up' button once, the auto-close time will

increase by 1 minute, the maximum time is 9 minutes. Press 'down' button the auto-close time decrease by 1

minute. The auto-close function will be turned off when LED displays 0. Press 'SET' button to confirm.

The default setting for this function is 0 (off).

Display '-'

Press 'UP' button

Press 'UP' or 'DOWN' button to choose the close time

The minute from 1 to 9

Press 'SET' to confirm

NOTE：The auto close is only available when door is at its full open position.

When using auto close mode, a photo electric beam must be fitted correctly

and tested for operation at regular intervals.