Makita 4340FCT Teknik Bilgiler - Sayfa 10

Elektrikli Alet Makita 4340FCT için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita 4340FCT 16 sayfaları. Jig saw
Ayrıca Makita 4340FCT için: Kullanım Kılavuzu (17 sayfalar), Teknik Özellikler (2 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (13 sayfalar)

epair

< 11 > Disassembling armature (4340T, 4340CT, 4340FCT)

1. With referring to the following section, disassemble handle L and R, and gear housing cover.

"< 4 > Disassembling handle section" at page 3

"< 5 > Disassembling gear housing cover section" at page 4

2. Disassemble retaining ring S-8, and separate crank complete and balance plate from the shaft of gear housing

as illustrated in Fig. 27.

< Note in disassembling >

* No need to disassembling hex socket head bolt M4 x 12 and crank complete from balance plate.

* Be careful, not to lose needle bearing 407.

3. Unscrew 4 pcs. of tapping screws M4 x 30, and separate gear housing from motor housing.

Separate armature from gear housing as illustrated in Fig. 28.

4 pcs. of

tapping screws

M4 x 30

4. Disassemble self lock with small flat head screwdriver. Then, magnet sleeve, wave washer 6 and rubber ring 19

can be disassembled from armature shaft as illustrated in Fig. 29.

5. Disassemble ball bearing 607 LLB from armature shaft as illustrated in Fig. 30.

Retaining S-8

Crank complete

Gear complete

Balance plate

Motor housing

Self lock

Fig. 29

No.1R269 Bearing extractor

Ball bearing 607 LLB

Needle bearing 407

Gear housing

Armature

Insulation washer

Ball baring 607

Fig. 30

Fig. 27

Fig. 28

Rubber ring 19

Wave washer 6

Magnet sleeve

(Magnet sleeve is not used in

model 4341T.)

Insulation washer

P 10 / 16