Makita 4341FCT Donanım Teknik Bilgileri - Sayfa 12

Elektrikli Alet Makita 4341FCT için çevrimiçi göz atın veya pdf Donanım Teknik Bilgileri indirin. Makita 4341FCT 14 sayfaları. Jig saw
Ayrıca Makita 4341FCT için: Teknik Özellikler (2 sayfalar), Parça Dağılımı (3 sayfalar), Kullanım Kılavuzu (13 sayfalar)

Sayfayı Yazdır

epair

< 14 > Disassembling switch rod (4341T, 4341CT, 4341FCT)

1. With referring to "< 11 > Disassembling armature (4341T, 4341CT, 4341FCT)" at page 10, disassemble rear cover.

2. Disassemble the following parts from motor housing. See Fig. 38.

Model No.

4341FCT

4341CT

4341T

3. Disconnect switch rod from switch lever by pulling. Then, switch rod can be disassembled from motor housing.

See Fig. 39.

LED circuit

Switch

Switch block unit

< 15 > Assembling switch rod

1. Insert switch rod into motor housing and align the wide square hole of switch rod with the wide square hole of

motor housing. See Fig. 40 and Fig. 40A.

2. Pressing the switch rod to the wall of motor housing, insert switch lever into the aligned wide square holes as

illustrated in Fig. 38A.

3. Pushing the switch rod to the gear housing side, interlock switch lever with switch rod.

Motor housing

Switch lever

4. Connect lead wire from LED circuit to controller.

Parts to be disassembled

LED circuit, Switch, Switch block unit, Controller

Switch, Switch block unit, Controller

Switch, Switch block unit,

Controller

Wide square hole

of motor housing

Wide square hole

of switch rod

Switch lever

Fig. 38

Press the inserted switch rod

to the wall of motor housing

with aligning the wide square

holes of switch rod to the wide

square hole of motor housing.

Switch rod

Motor housing

Fig. 39

Switch rod

Fig. 40

Switch rod

Fig. 40A

P 12 / 14