Makita 4350CT Teknik Bilgiler - Sayfa 8
Elektrikli Alet Makita 4350CT için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita 4350CT 14 sayfaları. Jig saw
Ayrıca Makita 4350CT için: Teknik Özellikler (2 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (13 sayfalar)
R
epair
[9] Disassembling parts in Gear housing
1. Do the disassembling steps of Gear housing cover as illustrated in Fig. 6.
2. While Locking Crank complete with 1R235, remove two M4x12 Hex socket head bolts. (Fig. 24)
Note: Two M4x12 Hex. socket head bolts are adhesive bolts. It is recommended to unscrew them with impact driver.
Fig. 24
Balance plate
3. Disassemble Retaining S-8 using 1R291. Then, the inner parts are disassembled from Gear housing as illustrated in Fig.25.
Fig. 25
Needle bearing 407
Note: Be careful not to lose Need bearing 407 when disassembling.
Retaining
ring S-8
1R235
Retaining ring S-8
Balance plate
Gear complete
Push plate
Seal plate
2 pcs. of M4x12
hex socket head bolts
Crank complete
Flat washer 8
Gear housing
P 8 / 14