CORNING ONE GX Hızlı Kurulum Sayfası - Sayfa 4

Ölçüm Cihazları CORNING ONE GX için çevrimiçi göz atın veya pdf Hızlı Kurulum Sayfası indirin. CORNING ONE GX 14 sayfaları. Higher power 40 w dual-band wcs/2.5 ghz tdd das remote
Ayrıca CORNING ONE GX için: Genel Bilgilendirme Kılavuzu (12 sayfalar)

Sayfayı Yazdır

ADDITIONAL REQUIRED TOOLS

• Electric Drill (12 diameter head for drilling holes for

wall mount)

• Spanner (0.31-in for tightening GX M8 nuts)

• For pole-mount installations – the GX bracket supports wooden

pole mounting via the a dedicated GX accessory kit (ordered

separately): AK-GX-QUAD-BRKT-WDPOLE

REQUIRED HEADEND CONNECTIONS FOR

DEPLOYMENTS WITH CORNING® OPTICAL

NETWORK EVOLUTION (ONE™) SOLUTION

IMPORTANT! Each HEU supports up to eight GX remotes.

The following additional elements are required (ordered separately):

• Optical central hub – OCH-4-WDM or OCH-8-WDM;

installed in 19-in communication rack with HEU

• ERFCv2-OCH cable

• SC-450 – installed in 19-in communication rack with

the HEU and OCH

Notes:

Refer to the quick installation sheets provided with

the OCH and SC-450 for instructions on how to

install the units.

Refer to Figure 1 for an example of where to install

the OCH and SC-450 units in the communication

rack with the HEU in order to facilitate the cable

connections.

Corning Optical Communications

Figure 1. Example of Rack Configuration

Quick Installation Sheet | CMA-581-AEN | Page 4