CORNING EDC-02P-NH Manuel - Sayfa 6

Muhafaza CORNING EDC-02P-NH için çevrimiçi göz atın veya pdf Manuel indirin. CORNING EDC-02P-NH 7 sayfaları. Environmental distribution center
Ayrıca CORNING EDC-02P-NH için: Manuel (12 sayfalar)

Sayfayı Yazdır

9.2. For Buffer Tube Fan-Out Kits

EDC-02P-NH

Step 1:

route the buffer tube(s) twice

around the radius guides in a

counterclockwise direction.

Step 2:

mark the location of the

mounting bracket on the tube(s).

Step 3:

Install fan-out kit(s) and connectors.

Step 4:

re-route the buffer tube(s) around

the radius guides and secure the

fan-out bodies with a cable tie.

NOTE:

For both applications, route the connectorized

fan-out tubing around the radius control guides

and plug connectors into the appropriate

connector panel.

STANDARD RECOMMENDED PROCEDURE 003-304 | ISSUE 10 | September 2010 | PAGE 6 OF 7

EDC-06/12P-NH

Step 1:

Step 2:

Step 3:

TPA-2927

Step 4:

Step 5:

TPA-2926

remove splice tray holder bracket.

route the buffer tube(s) three

times around the radius guides in a

counterclockwise direction.

mark the location of the mounting

bracket on the tube(s).

Install fan-out kit(s) and connectors.

re-route the buffer tube(s) around

the radius guides and secure the

fan-outs with a cable tie.

TPA-2924

TPA-2925