Makita 5091DWG Kullanım Kılavuzu - Sayfa 8
Elektrikli Alet Makita 5091DWG için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 5091DWG 18 sayfaları. 85 mm (3-3/8")
Sayfayı Yazdır
15. Place the wider portion of the saw base on that part of the workpiece which
is solidly supported, not on the section that will fall off when the cut is made.
As examples, Fig. 5 illustrates the RIGHT way t o cut off the end of a board,
and Fig. 6 the WRONG way. If the workpiece is short or small, clamp
it
down.
DON'T TRY TO HOLD SHORT PIECES BY HAND!
Fig. 5
Fig.
1
r------
16. Never attempt to saw with the circu-
lar saw held upside down in a vise.
This is extremely dangerous and can
lead t o serious accidents.
I
Fig.
17. Before setting the tool down after completing a cut, be sure that the lower
(telescoping) guard has closed and the blade has come t o a complete stop.
SAVE THESE INSTRUCTIONS.
8