Avante U-3000 Kullanıcı Kılavuzu - Sayfa 8

Kart Okuyucu Avante U-3000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avante U-3000 13 sayfaları.

 To change the Data field, use the

Tag Kill



Press the OK key when this option is highlighted.

Tag Lock



Press the OK key when this option is highlighted.

RECORD LIST

The Record List menu item will allow for review of the records and EPC stored in memory. The list will also indicate

the number of records that have been recorded so far; this number is located on the top right of the display next

to the title "Record"

To view a list of records, do the following:

1. Press the OK key when the Record List option is highlighted. The record list is displayed as follows:

(Where the EPC number is composed of 28 characters containing numbers and letters)

2. Use the

up or

you reach the last number, scroll back up or press on the CL key to exit. Note: if no selections are made

while in this menu item, the unit will return to the "Automatic" display; the display may also turn off to

save power.

This option allows you to save the records from the unit to an SD card that may be inserted on the available SD

port located near the bottom of the unit.

To save records from the unit to the SD card, do the following:

1. Highlight the Save to SD option and press the OK key; the display will show "Ready to save..." and then the

"Save successful" message will appear. The unit will return to the "Automatic" display if no other

selections are made.

(The EPC, Bank Num, Block, and Data fields have been explained in the previous section.

However, here the Block field can contain numbers in the range of 00 to 19. In addition

the data field is changeable to any combination of letters and numbers)

change a character, use the

to change, then use the

your choice. Press the OK key to save the changes; a "Write failed" message will appear

to indicate a failure in writing data to the card or tag.

down arrow key to view tags or cards that have been recorded by the unit. Once

U-3000 Reader

Right arrow key (#) to move to the Data field. To

Right arrow key (#) to move to the character you wish

up or

down arrow key to select a number or letter of

XXXXXXXXXXXXXX

2011

8 |

P a g e