Avante Cloud9 Kullanıcı Kılavuzu - Sayfa 3
Masaj Avante Cloud9 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avante Cloud9 16 sayfaları. Ultimate electric reclining massage chair
Sayfayı Yazdır- 1. Safety
- 2. Safety Symbols
- 3. Table of Contents
- 4. Parts Identification
- 5. Assembly and Set-Up
- 6. Operation
- 7. Remote Control Features
- 8. Remote Control Buttons
- 9. Auto Selection Massage Mode
- 10. Adjusting the Reclining Angle
- 11. Leg Extension Settings
- 12. Manual Selection Massage Mode
- 13. After Use
- 14. Maintenance
- 15. Troubleshooting
- 16. Specifications
Ultimate Electric Reclining Massage Chair
General Electrical Safety
• Inspect electrical equipment, extension
cords, power bars, and electrical fittings for
damage or wear before each use. Repair
or replace damaged equipment
immediately.
• Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting or
disconnecting equipment.
• When wiring electrically powered
equipment, follow all electrical and safety
codes.
• Wherever possible, use a residual current
device (RCD).
• High voltage / high current power lines may
be present. Use extreme caution to avoid
contact or interference with power lines.
Electrical shock can be fatal.
Ensure that the chair is connected to an outlet having the correct voltage. Ensure that the power cord is seated fully into the power outlet.
Otherwise, it may result in fire hazards or electric shocks.
Do not modify the plug provided with the product if it will not fit the outlet.
Do not use the chair outdoors.
Do not use the chair in any way not prescribed in this User Manual.
Do not install the chair in an area of high humidity, such as a sauna.
Persons with the following conditions should seek medical advice before using the chair:
• Those in the early stages of pregnancy or immediately after giving birth.
• Persons with weak bones, osteoporosis, or spinal fractures.
• Persons with sensory impairments caused by circulatory or other serious ailments.
• Persons suffering from heart diseases.
• Persons with pacemakers or other medical devices prone to electronic interference.
• Persons who are heat sensitive.
• Persons under a doctor's care, or those experiencing unusual physical discomforts.
• Persons who are suffering from any other serious impairments or illnesses.
Keep massage sessions to no more than 30 minutes and rest after every massage.
If you begin to experience pain or other physical discomfort while using the chair, discontinue using the chair immediately.
Do not fall asleep in the chair during a massage. Do not use the chair after consuming alcohol.
If the chair does not start, or if there is any type of malfunction, please stop using the chair immediately and turn OFF the main power switch.
Contact a qualified technician for repairs or maintenance.
Ensure that you turn OFF the main power switch and unplug the chair from the power outlet after each use or during cleaning.
Never plug or unplug the chair to and from a power source (i.e. protector, wall outlet, etc.) with wet hands.
Never use a wet cloth to clean the power switch, power cord, or any other electronic component.
E&OE
General Electrical Safety
• Electrically grounded equipment must have
an approved cord and plug and be
connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and
operate equipment by connecting and
disconnecting the electrical cord.
• Do NOT use equipment that has exposed
wiring, damaged switches, covers or
guards.
• Do NOT use electrical equipment in wet
conditions or in damp locations.
• Do NOT use electrical cords to lift, move or
carry equipment.
• Do NOT coil or knot electrical cords, and
ensure electrical cords are not trip hazards.
Massage Chair Safety
© 2019 Avante
General Service Information
• The equipment must be serviced or
repaired at authorised service centres by
qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to ensure
equipment safety is maintained.
• Do NOT attempt any maintenance or repair
work not described in this manual.
• After use, the equipment and components
may still be hot – allow the equipment to
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before adjusting, changing
accessories or performing repair or
maintenance.
• Do NOT adjust while the equipment is
running.
• Perform service-related activities in suitable
conditions, such as a workshop.
• Replace worn, damaged or missing
warning/safety labels immediately.
3