JAMEC PEM 10.3012 Kullanım Kılavuzu - Sayfa 3

Elektrikli Alet JAMEC PEM 10.3012 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. JAMEC PEM 10.3012 4 sayfaları. Tyre inflator
Ayrıca JAMEC PEM 10.3012 için: Kullanım Talimatları (4 sayfalar)

Sayfayı Yazdır

Battery Change

This inflator requires 2 x AAA batteries. If the voltage of the batteries fall below 2.6 volts, the battery icon

will flash continuously until it shuts down. If the voltage of the batteries fall below 2.5 volts, the low "LO"

battery icon appears while the power is on and then shuts down automatically. The batteries must be

changed if the battery icon flashes.

Scale Change

Press and hold the scale change button to activate the display,

once the display is activated press and hold the button for 2

seconds to change the display scale.

WARNING

Important: To avoid the risk of personal injury, especially to the eyes, face or skin, DO NOT

direct the aim stream at any person or body parts

Instruction Manual

1. Unscrew the battery cap

2. Slide the batteries into the inflator with the

positive end facing out of the inflator

3. Replace the battery cap carefully and do

not over tighten

Scale

change

button

PSI

32.

TDR3OOO

Part No. 10.3012