Frigor G315A++ series Servis Kılavuzu - Sayfa 12

Dondurucu Frigor G315A++ series için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Frigor G315A++ series 20 sayfaları. Chest freezer

G 315 A++

Chest Freezer

Service manual

SERVICE MANUAL

Model: G315A++

4-4. Thermostat assembly

First take off the knob (refer 4-3), Use turnbuckle spanner or acutilingual plier, unscrew the

turnbuckle, then thermostat can be moved from back of panel.

Note: When assembly thermostat you should placed thermostat in originally direction.

5-1. Control panel

Freezing temperature selection is made by setting the control from min to max (coldest).

If you want colder or warmer temperatures, adjust the control one step at a time.

Allow several hours after each one-step adjustment for the freezer temperature to stabilize.

1. Clean the inside of the freezer with a mild solution of baking soda and water

2. Connect cord to power outlet.

3. The display screen presents the original setting temperature 0°F or -18℃ and blinks with

1HZ frequency; Then it displays actual inside temperature automatically after 5 seconds.

To press the downward button for 3 seconds under keyboard locking condition, temperature

display starts to flash and the system is entering the setting status( when it comes into setting

status every time, the figure of temperature blink is the one of setup last time ).

5. Allow freezer to operate for at least two hours before placing food inside.

Livøvej 22 - 8800 Viborg - Tlf. 86 61 34 11 - [email protected] - www.vibocold.dk

Total solutions in refrigeration and freezing

Totalløsninger i køl og frys

Issue 2014-03-13

Rev.

Ref1102S001V0