Makita 6825 Kullanım Kılavuzu - Sayfa 6

Elektrikli Alet Makita 6825 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 6825 12 sayfaları. Drywall screwdriver
Ayrıca Makita 6825 için: Kullanım Kılavuzu (17 sayfalar), Parça Dağılımı (3 sayfalar), Parça Dağılımı (2 sayfalar), Kullanım Kılavuzu (8 sayfalar), Kullanım Kılavuzu (8 sayfalar), Kullanım Kılavuzu (7 sayfalar), Kullanım Kılavuzu (10 sayfalar), Teknik Bilgiler (10 sayfalar)

Sayfayı Yazdır
Makita 6825 Kullanım Kılavuzu
1
A
B
1. Reversing switch lever
A
1. Hook
ASSEMBLY
1
1. Locator
2. Locking sleeve
6
Reversing switch action
002635
This tool has a reversing switch to change the direction of rotation. Move the
reversing switch lever to the
position (B side) for counterclockwise rotation.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the
tool.
Hook
002644
The hook is convenient for temporarily hanging the tool.
1
When using the hook, pull it out in "A" direction and then push it in "B" direction
to secure in place.
When not using the hook, return it back to its initial position by following the
above procedures in reverse.
002645
B
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing the bit
To remove the bit, first pull the locator out of the locking sleeve. Then grasp
002653
the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Some-
times, it helps to wiggle the bit with the pliers as you pull.
2
position (A side) for clockwise rotation or the