Ikegami ICD-509 Kullanım Kılavuzu

Renkli Kamera Ikegami ICD-509 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Ikegami ICD-509 2 sayfaları.

Sayfayı Yazdır

INSTRUCTION MANUAL

COLOR CAMERA

MODEL

ICD-509

OUTDOOR USE WARNING

WARNING – TO PREVENT FIRE OR

ELECTRIC SHOCK, DO NOT

EXPOSED THIS APPLIANCE TO

RAIN OR MOISTURE.

Ikegami Tsushinki Co., Ltd.

■ Ikegami Electronics (U.S.A.), Inc.

37 Brook Avenue, Maywood, N.J. 07607, U.S.A.

Phone: (201) 368-9171, FAX (201) 569-1626

www.Ikegami.com

■ Ikegami Electronics (U.S.A.), Inc, West Coast Office

2631 Manhattan Beach Blvd., Redondo Beach, C.A. 90278

Phone: (310) 297-1900, FAX (310) 536-9550

www.Ikegami.com

■ Ikegami Electronics (Europe) GmbH

Ikegami Strasse 1, D-41460 Neuss, Germany

Phone : 02131-123-0, FAX 02131-102820

www.Ikegami.de

■ Ikegami Electronics U.K. Office:

Unit E1, Cologne Court, Brooklands Close,

Windmill Road, Sunbury-on-Thames,

Middlesex, TW16 7EB, U.K.

Phone:01932-769700 FAX 01-92-769710

www.Ikegami.co.uk

U001496-1

Thank you very much for your wise choice of the Ikegami Color CCD Camera.

Please carefully read this Instruction Manual to keep your camera at full capacity.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

the appliance.

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at his own expense.

CAUTION; ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD

VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT.

Muchísimas gracias por haber elegido la cámara CCD en color de Ikegami. Lea

cuidadosamente este manual de instrucciones para mantener su cámara en las

mejores condiciones de funcionamiento.

El signo de exclamación en el interior de un triángulo equilátero

tiene la finalidad de avisar al usuario de la presencia de

instrucciones de utilización y mantenimiento (servicio) importantes

en el manual que acompaña al aparato.

NOTA: Este equipo ha sido probado y ha demostrado cumplir con los límites

establecidos para los dispositivos digitales de la clase B, en conformidad con el

Apartado 15 de los Reglamentos de la FCC. Estos límites han sido diseñados

para proporcionar una protección razonable contra la interferencia perjudicial si

el equipo se utiliza en un entorno comercial. Este equipo genera, utiliza y puede

radiar energía radioeléctrica, y, si no se instala y usa de acuerdo con las

instrucciones, puede causar interferencias perjudiciales en las comunicaciones

por radio, en conformidad con el Apartado 15 de los Reglamentos de la FCC.

Estos límites han sido establecidos para proporcionar una protección

razonable, el usuario tendrá que corregir la interferencia corriendo él a cargo de

los gastos pertinentes.

PRECAUCIÓN; CUALQUIER CAMBIO O MODIFICACIÓN QUE NO HAYA

SIDO APROBADO EXPRESAMENTE POR LA PARTE RESPONSABLE

PODRÍA ANULAR LA AUTORIZACIÓN QUE TIENE EL USUARIO PARA

UTILIZAR EL EQUIPO.

Instructions for Disposal of Electric and Electronic Equipment in

Private Household

Disposal of used Electric and Electronic Equipment

(Applicable in the European Union and other European countries

with separate collection systems)

This symbol on the product, or in the related documents in the package,

indicates that this product shall not be treated as normal household waste.

Instead, it should be taken to a proper applicable collection point or depot

for the recycling of electric and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent possible negative

consequences for the environment and human health, which could otherwise be caused

by inappropriate waste handling of this product. The recycling of materials will help to

conserve natural resources.

For more detailed information about recycling of this product, please contact your local

city authority, your household waste disposal service or the place where you purchased

the product.

Instrucciones para eliminar equipos eléctricos y electrónicos de

una casa privada

Eliminación de equipos eléctricos y electrónicos usados

(Normas aplicables en la Unión Europea y en otros países europeos

con diferentes sistemas de recogida)

Este símbolo en el producto, o en los documentos relacionados, indica que

este producto no deberá ser tratado como un residuo doméstico normal.

En cambio, deberá ser llevado a un punto o lugar donde los equipos

eléctricos y electrónicos sean recogidos para ser reciclados.

Asegurándose de que este producto sea eliminado correctamente, usted ayudará a

impedir las posibles consecuencias negativas sobre el medio ambiente y la salud

humana que podrían ser causadas por el manejo inapropiado de este producto como

residuo doméstico. El reciclado de los materiales ayudará a conservar los recursos

naturales.

Para conocer una información más detallada acerca del reciclado de este producto,

póngase en contacto con las autoridades de su localidad, con su servicio de recogida de

residuos domésticos o con el comercio donde adquirió el producto.

English

Handling precautions

E-1.

(1) Do not open the case of camera and never touch inside, where precision parts

are assembled. A trouble or accident may result.

(2) Do not install the unit where it is exposed to water splash, high humidity and

heavy dust. Internal parts may be damaged. Preferably use the camera at

ambient temperatures of -10 to +50°C.

(3) Be very careful not to drop or shock the camera.

(4) Never touch the CCD surface.

General

E-2.

This unit is a single TV camera, switchable between color and black&white and

equipped with a 1/3-inch CCD (Charge Coupled Device) with about 380,000

picture elements (NTSC). With a single camera, high-quality color images are

obtained by day, whereas high-sensitivity black-and-white images by night. The

unit provides for higher resolution, greater sensitivity and crisper pictures and

has back-light compensation, AES (Automatic Electronic Shutter), auto iris and

other functions. The CCTV camera is best suited for general monitoring

applications.

Features

E-3.

(1) Day/night selection function

Depending on the ambient brightness, automatic mode selection is made.

High-quality color images are achieved by day, and high-sensitivity black-

and-white ones by night, which offer crisp pictures 24 hours. The switching

can also be controlled when combined with external sensors and other

devices.

(2) Digital process

The video signal processing is controlled by an internal RGB digital signal

processor (DSP) for stable, clear pictures.

(3) High-quality and high-resolution pictures

The unit is designed for noises as low as a smear level of -110 dB. What's

more, the DSP-based appropriate details correction function is available for

sharper images with better signal/noise ratio.

The horizontal resolution is as high as 540 TV lines in the color mode and as

high as 570 TV lines in the black-and-white mode.

(4) Back-light compensation

With the auto iris lens or the AES in use, effective back-light compensation

can be achieved.

(5) Auto iris function (Exclusive for DC iris lens)

The unit is compatible with DC iris lens. A wide variety of CCTV-destined

auto iris lenses are applicable.

(6) Auto white balance

The unit is also provided with automatically tracking white balance control

(ATW). Subjects are automatically corrected to optimum white balance

regardless of their color temperature fluctuations.

(7) AES (Automatic Electronic Shutter)

The AES function with a sensitivity ratio of 1 : 1600 employs variable stepwise

control to provide smooth sensitivity control. Even with a fixed aperture lens,

stable video outputs are equivalent to those with a F1.4 thru F50 auto iris lens.

(This function is not usable in regions where the power frequency and the

camera's vertical frequency are different.)

(8) Flange focal distance adjustment mechanism

When a zoom lens is used, the focus tracking is easily adjustable.

(9) Focus EZ function

Just press the button located at the back of the unit, and the auto iris lens

aperture will be kept open. Even in broad daylight, the focus is readily

adjustable no matter how much the depth of field is.

(10) Monitor selection function

Optimum picture quality can be preset according to the type of monitor (CRT

or LCD) being connected.

Names of parts and their

E-4.

functions

(TOP VIEW)

(A VIEW)

(RIGHT VIEW)

(BACK VIEW)

Lens mount (CS mount)

This is used to mount the lens on the camera. Many types of CS mount lens can

be attached.

Holder mounting screw holes

These holes are used to fix the camera on the camera holder. They are also

applicable to general tripods.

Note:

To attach the camera on a tripod or a camera holder, be sure to

use mounting screws (1/4" -20UNC) that are shorter than 5.5 mm.

Flange focal distance adjuster

The flange focal distance may need readjustment depending on the type of

lens. Readjust the distance also when the focus ring on the lens fails to put the

image in focus.

Flange focal distance lock screw

After finely adjusting the camera's flange focal distance, fix the distance with

this screw.

Auto iris lens connector (Exclusive for DC iris lens)

The connector is specifically used to connect the auto iris lens.

Use the optional auto iris lens control connector plug (E4-191J-150 or equivalent).

• For the DC type auto iris lens

Auto iris lens

— Connector cable leads —

1. Damping coil (-)

2. Damping coil (+)

3. Driving coil (+)

4. Driving coil (-)

Connect the leads as shown above.

Refer also to the instructions of the lens.

Numbers of connector pins

FOCUS EASY switch (FOCUS EZ)

With an auto iris lens being connected, this switch is used to support the focus

adjustment. Just press the FOCUS EZ button, and the lens aperture is kept

open for about 40 seconds. (Press it again, and the aperture opening time will

be prolonged.)

Line lock phase control (LL PHASE)

This control adjusts the phases of the video output and the power line.

■ Precautions in setting the LL PHASE

1. Press the LL PHASE's "<" and ">" buttons at once, and the phase will

be back to its factory setting.

2. When the "<" and ">" buttons have been pressed at once, push the ">"

button once more to put the data in memory.

Iris level control (IRIS LEVEL)

This control adjusts the sensitivity with a DC iris lens in use.

AES selector switch (AES)

The switch turns on and off the AES function. When an auto iris lens is

used, be sure to keep this switch at OFF position.

Backlight compensation selector switch (BLC)

The switch turns on and off the backlight compensation function.

Day/night selector switch (D/N)

The AUTO and COLOR modes are selectable.

AUTO: Automatic switching for high-quality color images by day and

high-sensitivity black-and-white ones by night.

* When the remote terminal gets short-circuited, the screen

switches itself to the B/W mode (priority given to remote control).

COLOR: Fixed in COLOR mode

* When the remote terminal gets short-circuited, the screen

switches itself to the B/W mode (priority given to remote control).

Note:

Suppose that the day/night switching function is enabled under

infrared lighting. If the light is too strong, the color mode and the

B/W mode may be switched alternately at regular intervals.

Accordingly, in installing the camera, make sure there is no such

trouble. Or it is advisable to control the color and B/W modes with

the remote terminal.

Display monitor selector switch

Optimum picture quality is selectable according to the type of monitor, CRT or LCD.

CRT: Preset for connecting to a cathode ray tube monitor

LCD: Recommended when hooking up an LCD motor or digital video monitor

Sync system selector switch (SYNC)

Used to choose between the internal sync and the line lock. Set the

selector to INT for use in internal sync, and LL for use in line lock. The line

lock cannot be used in regions with the power frequency of 50Hz.

Power indicator (POWER)

The LED indicator stays on in green while the camera power is on.

Video output connector (VIDEO OUT)

The output connector is connected to the video input connector of a monitor,

switcher or the like. (Terminate the terminal with a 75-ohm impedance.)

AC24V/DC12V power input terminal

Keep the input power at AC24V (21.6-26.4 V) or DC12V (10.5-15.0 V).

This installation should be made by a qualified service person and

should conform to all local codes.

Remote terminal

This is the sensor signal input terminal for the day/night switching filter.

By getting the terminals short-circuited, the B/W mode is fixed.

Remote

AUTO

OPEN

COLOR

OPEN

B/W

Either

SHORT

* For remote control alone, set the switch to "COLOR" to put the signals

through the remote terminal.

* No. 2 pin is used as GND terminal. Even by connecting No.1 pin to the

GND terminal, the B/W mode is fixed.

Connection

E-5.

Video output connector (VIDEO OUT)

• This is the output connector of video signal.

• The connector is used to connect the video camera to the video input connector of a

monitor, switcher or the like.

(To be connected with 75-ohm impedance)

• Use a coaxial cable for connection.

(Typical connections)

ICD-509

VCR

MONITOR

Specifications

E-6.

(1) Imaging device:

1/3-inch, IT-CCD

No. of effective picture elements;

768(H) x 494(V) lines, approx. 380,000 pixels

Color filter; Color difference line sequential system

(2) Scanning system:

2 : 1 color interlace, NTSC system compatible

(3) Vertical frequency:

NTSC: 59.94 Hz

(4) Horizontal frequency:

NTSC: 15.734 kHz

(5) Sync system:

Crystal lock or Line lock

(6) Video output:

VBS; 1.0 Vp-p/75 ohms

(7) Vertical resolution:

Color mode; 540 TV lines

Black-and-white mode; 570 TV lines

(8) Signal/noise ratio:

52 dB or better

(luminance signal, standard illumination, DETAIL OFF)

(9) Minimum illumination:

Color mode; 0.5 lx/F1.4 (output 50%)

0.37 lx/F1.2 (output 50%)

Black-and-white mode;

0.1 lx/F1.4 (output 50%)

0.075 lx/F1.2 (output 50%)

0.05 lx/F1.4 (output 25%)

0.037 lx/F1.2 (output 25%)

(10) Day/night selection:

Automatic/remote/manual switchable

B/W mode fixed using the remote control input enable contact

(11) AGC:

Provided

(12) White balance:

ATW

(13) Details correction:

Provided

(14) Back-light compensation (BLC): ON/OFF selectable