KitchenAid Undercounter Dishwasher 4171206 Kurulum Talimatları Kılavuzu - Sayfa 8

Bulaşık Makinesi KitchenAid Undercounter Dishwasher 4171206 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. KitchenAid Undercounter Dishwasher 4171206 8 sayfaları. Undercounter dishwasher

Sayfayı Yazdır

Custom-made

panels

-23

9116"

I----

-I

*For Models: KUDA220T and

KUDA22ST-17-7/16"

Custom wood or other materials

should be l/4" thick. Thinner

materials will need to have a spacer

panel installed behind custom

panel. If custom panel is more than

i/4" thick, the outer edge

will need to be routed as shown.

Custom wood panels need a

waterproof protective finish applied

to all sides and edges of panel.

After custom panels are installed,

check the door tension. The door

should be counterbalanced so it

doesn't fall open or close when

opened. If the door closes from an

open position, adjust the door-spring

brackets upward to a different hole.

If door falls open too quickly, move

spring bracket downward. If custom

panels are heavy, heavy-duty door

springs are available from your

KitchenAid dealer.

If the dishwasher

is not operating

properly.. .

Check these points:

Is the door closed tightly and

latched securely?

9 Has the cycle been set correctly

to start the dishwasher?

Is the water turned on?

Has a house fuse blown?

Has electrical power been

interrupted?

Note: If the motor has stopped

because of overload, it will

automatically reset itself within a

few minutes.

If after checking these points the

dishwasher still does not run or

complete a cycle, call for service.

Part No. 4171206

01989 KitchenAid

Prepared by KitchenAid@, St. Joseph, Michigan 49085

Printed in U.S.A.