Makita 9820-2 Kullanım Kılavuzu - Sayfa 2

Elektrikli Alet Makita 9820-2 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 9820-2 17 sayfaları. 200 mm (7-7/8") sharpener
Ayrıca Makita 9820-2 için: Broşür (1 sayfalar), Kullanım Kılavuzu (8 sayfalar)

Sayfayı Yazdır
Makita 9820-2 Kullanım Kılavuzu
BEFORE CONNECTING YOUR TOOL
TO A POWER SOURCE
Be sure
you
have read all
GENERAL POWER TOOL SAFETY RULES
GENERAL SAFETY PRECAUTIONS
(For All Tools)
1.
KNOW YOUR POWER TOOL. Read the owner's manual carefully. Learn the
tools applications and limitations, as well as the specific potential hazards
peculiar t o
it.
2.
KEEP GUARDS IN PLACE and in working order.
3.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o
see that keys and adjusting wrenches are removed from tool before turning
it
on.
4. KEEP WORK AREA CLEAN. Cluttered areas and benches invit? accidents.
5.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use power tools in damp
or wet locations, or expose them t o rain. Keep work area well lighted.
6.
KEEP CHILDREN AWAY. All visitors should be kept safe distance from work
area.
7. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by
removing starter keys.
8.
DON'T FORCE TOOL.
It
will do the job better and safer at the rate for which
it
was designed.
9.
USE RIGHT TOOL. Don't force tool or attachment t o do a job for which
it
was not designed.
IO.
WEAR PROPER APPAREL. Wear no loose clothing, gloves, neckties, rings.
bracelets, or other jewelry which may get caught in moving parts. Nonslip
footwear is recommended. Wear protective hair covering t o contain long hair.
1 1.
ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting oper-
ation is dusty. Everyday eyeglasses only have impact resistant lenses, they
are NOT safety glasses.
12.
SECURE WORK. Use clamps or a vise t o hold work when practical. It's safer
than using your hand and
it
frees both hands t o operate tool.
13.
DON'T OVERREACH. Keep proper footing and balance at all times.
1 4 .
MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and
safest performance. Follow instructions for lubricating and changing acces-
sories.
15.
DISCONNECT TOOLS before servicing; when changing accessories such as
blades, bits, cutters, and the like.
16.
REDUCE
THE
RISK OF UNINTENTIONAL STARTING. Make sure switch is
in off position before plugging in.
.
L