HIKVISION DS-73HUHI-F4/N Series Hızlı Başlangıç Kılavuzu - Sayfa 11
DVR HIKVISION DS-73HUHI-F4/N Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-73HUHI-F4/N Series 17 sayfaları.
Sayfayı Yazdır
11
V I E W L I V E V I D E O
Live View displays real-time video.
12
S E T U P R E C O R D I N G
The system defaults to record video continuously at 8 fps, or at 15 fps when motion is detected.
Recording Schedule
Default is to record continuously every day. Do the following to change the recording schedule:
1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.
2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.
3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect
(days will turn gray [off]) the calendar days you wish to record.
4. Apply time settings as desired.
5. Press APPLY.
Motion Detection Areas
To define the image areas that Motion Detection will monitor for each camera, do the following:
1.
2.
Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.
Use Camera pull-down menu to select camera to configure.
Icons in the upper right of screen show
each camera's record and alarm status.
• Alarm (video loss, tampering, motion
detection, sensor alarm, or VCA
alarm)
• Record (manual record, continuous
record, motion detection, alarm, or
VCA triggered record)
• Event/Exception (event and
exception information appears at
lower-left corner of screen)
TYPE
Motion or Continuous (default)
COLOR
Shows Recording Schedule days:
• Blue=Continuous
• Yellow=Event (motion/alarm)
• Grey=None
TIMES
Customize schedule times (ignore for
"motion only" recording)
ADD
Press to add time settings to
schedule
ENABLE SCHEDULE
If not checked, camera will not record