KitchenAid W10300929B Kullanıcı Talimatları - Sayfa 14
Bulaşık Makinesi KitchenAid W10300929B için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. KitchenAid W10300929B 19 sayfaları.
Sayfayı Yazdır
Number of Loads
If you wash
If you scrape and rinse
If you only scrape
If you do not scrape or rinse
Per Week
before loading
before loading
before loading*
before loading
1,3
Once per year
once per year .............................
Twice per year ........................................
Every two months
4-7
Once per year
Once per year
Twice per year
Once per month
8-12'
Once per year
' Twice per year
Every three months
Every two weeks
13-14
Once per year
Twice per year
Every three months
Once per week
*Manufacturer's
recommendation:
This practice will conserve the water and
will also save you time and effort.
Very Hard Water
If you have hard water (above 15 grains), clean your filter at least
once per month. Building up of white residue on your dishwasher
indicates hard water. For tips on removing spots and stains, see
"Troubleshooting"
section.
Filter Removal Instructions
1. Turn the upper filter
assembly 1/4turn
counterclockwise
and lift
out.
2. Grasp the lower filter in the
circular opening, lift
slightly, and pull forward to
remove.
3. Clean the filters as shown
below.
To remove upper filter assembly
Cleaning Instructions
IMPORTANT: Do not use wire brush, scouring pad, etc., as they
may damage the filters.
Rinse filter under running water until most soils are removed. If you
have hard-to-remove
soils or calcium deposits from hard water, a
soft brush may be required.
energy that you would have used to prepare your dishes. This
Filter Reinstallation Instructions
1,
Noting the previous
illustrations,
place the
lower filter under the
locating tabs in the bottom
of the dishwasher so the
round opening for the
upper filter assembly lines
up with the round opening
in the bottom of the tub.
] tab
To replace upper filter assembly
2,
3.
Insert the upper filter assembly into the circular opening in
the lower filter.
Slowly rotate the filter clockwise until it drops into place.
Continue to rotate until the filter is locked into place. If the
filter is not fully seated (still turns freely), continue to turn
the filter clockwise until it drops and locks into place.
NOTE: The upper filter assembly arrow does not have to
align with the arrow in the lower filter as long as the filter is
locked.
IMPORTANT: To avoid damage to dishwasher, do not operate your
dishwasher without the filters properly installed. Be sure the lower
filter is securely in place and the upper filter assembly is locked into
place. If the upper filter assembly turns freely, it is not locked into
place.
14