Avantgarde ARM1100W Kullanıcı Kılavuzu - Sayfa 13

Buzdolabı Avantgarde ARM1100W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avantgarde ARM1100W 17 sayfaları.

Install refrigerator in a convenient location away from extreme heat and cold. Allow sufficient clearance between the refrigerator

•

and side wall so the door will open without obstruction. Refrigerator is not designed for recessed installation.

Select a space with strong level floor.

•

Allow 5 inches of space between the refrigerator's side and the wall.

•

The appliance must be correctly connected to the power supply.

•

Do not use an extension cord.

•

POWER CORD REPLACEMENT

If the refrigerator's power cord is damaged, have it replaced by a qualified repair agent.

CHANGING THE REVERSIBLE DOOR

CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal

process.

To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back. (Fig. C)

Remove both leveling legs located at the front of the cabinet.

Remove the screws holding the lower hinge assembly to the cabinet.

Remove the main door assembly from the refrigerator cabinet. (Open door and pull down)

Remove (unscrew) the main door top hinge pin. (Fig. D)

Re-install the main door top hinge pin on the opposite side of the cabinet.

Remove the door plug and door bushing located on the top of the main door assembly.

Interchange positions. (i.e. door plug right side, door bushing left side.)

Re-install main door assembly on the cabinet.

10. Remove door bushing (bottom door) and install on the opposite side.

11. Re-install the lower hinge assembly on the opposite side.

12. Make sure the door assembly is properly aligned on the cabinet before tightening lower hinge screws.

13. Re-install both leveling legs.

The process is now complete.