Makita AT638A Kullanım Kılavuzu - Sayfa 6

Elektrikli Alet Makita AT638A için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita AT638A 13 sayfaları. Narrow crown stapler
Ayrıca Makita AT638A için: Kullanım Kılavuzu ve Kullanım Kılavuzu (13 sayfalar)

Sayfayı Yazdır

Air duster

CAUTION:

Do not aim the ejection port of the

air duster to someone. Also, keep your hands and

foot away from the ejection port. If the air duster

button is accidentally pushed, it may cause a per-

sonal injury.

CAUTION:

Always check your surroundings

before using the air duster. Blown dust or objects

may hit someone.

CAUTION:

Do not connect or disconnect the

air hose while pushing the air duster button.

The air supplied to the tool can also be used as an air

duster. You can clean the work area by pressing the

button on the grip end.

► 1 . Button

NOTICE:

After using the air duster, the driving force

of the tool will temporarily decline. Wait until the air

pressure recovers in this case.

NOTICE:

Perform a test blow if you use the air

duster immediately after the oil was applied. The oil

may be sprayed with the air.

ASSEMBLY

CAUTION:

Before carrying out any work on

the tool, always return the trigger and disconnect

the air hose from the tool.

CAUTION:

Load the same type, size and

uniform length of staples when loading multiple

strips of staples in the magazine.

Loading stapler

NOTE: Always hold the rear of the sliding door when

you press the lever. The sliding door opens suddenly

with the lever pressed when staples are stored in the

magazine.

Press the lever and open the sliding door of the

magazine.

► 1 . Lever 2. Sliding door

Insert a strip of staples into the opening of the

magazine all the way.

Close the sliding door until the sliding door is

locked.

Removing staples

To remove staples, follow the procedures of "Loading

stapler" in reverse.

Nose adapter

To prevent the surface of workpiece from being

scratched or damaged, use the nose adapter.

6 ENGLISH