Avanti BCA4562SS Kullanım Kılavuzu - Sayfa 7
Buzdolabı Avanti BCA4562SS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Avanti BCA4562SS 16 sayfaları. Avanti products refrigerator parts list
Ayrıca Avanti BCA4562SS için: Parça Listesi (2 sayfalar)
Sayfayı Yazdır
WARNING
•
Read all instructions before using the refrigerator.
•
DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or abandoned
appliances are still dangerous . . . even if they will "just sit in the garage a few days".
•
Before you throw away your old refrigerator or freezer: Take off the doors. Leave
the shelves in place so that children may not easily climb inside.
•
Never allow children to operate, play with, or crawl inside the refrigerator.
•
Never clean refrigerator parts with flammable fluids. The fumes can create a fire
hazard or explosion.
•
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
this or any other refrigerator. The fumes can create a fire hazard or explosion.
Before Using Your Refrigerator
• Remove the exterior and interior packing.
• Check to be sure you have all of the following parts:
•
2 Wired Shelves (BCA4560W and BCA4561B)
•
2 Tempered Glass Shelves ( for BCA4562SS only)
•
1 Tempered Glass Crisper Cover
•
1 Crisper
•
2 Keys
•
1 Instruction manual
•
Before connecting the refrigerator to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
•
Clean the interior surface with lukewarm water using a soft cloth.
Installing Your Refrigerator
•
This appliance is designed to be free standing only, and should not be recessed or built-in.
•
Place your refrigerator on a floor that is strong enough to support the refrigerator when it is
fully loaded. To level your refrigerator, adjust the leveling leg at the bottom of the refrigerator.
•
Allow 5 inches of space between the back and sides of the refrigerator, which allows the
proper air circulation to cool the compressor and condenser.
•
Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the refrigerator not to
perform properly.
•
Avoid locating the refrigerator in moist areas.
•
Plug the refrigerator into an exclusive, properly installed-grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.
•
After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before
placing food in the refrigerator compartment.
IMPORTANT SAFETY INSTRUCTIONS
-Save these instructions-
INSTALLATION INSTRUCTIONS
To reduce the risk of fire, electrical shock, or
injury when using your refrigerator, follow
these basic precautions:
7