GARCARE GPHT07 Manuel - Sayfa 12

Düzeltici GARCARE GPHT07 için çevrimiçi göz atın veya pdf Manuel indirin. GARCARE GPHT07 14 sayfaları. Corded pole hedge trimmer

For the pole hedge trimmer GPHT07

This model just can be the pole hedge trimmer

Assembly:

1.Loosen the 4 pcs screws on the rotary handle(3) and take out the big screw at the

middle of the screw(Fig12) .

2. Put the telescopic tube into the rotary handle ,tighten the big screw and 4 pcs

screw .

Adjustment of engine head

Press the rotating knob (12) adjust the engine head until it snaps into the desired

position.

After adjustment make sure that the angle adjustment buttons have returned to

their initial positions. Otherwise the tool cannot start.