Makita BHR240Z Teknik Bilgiler - Sayfa 9

Elektrikli Alet Makita BHR240Z için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita BHR240Z 14 sayfaları. Cordless rotary hammer

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -6. Swash Bearing Section (cont.)

DISASSEMBLING

4) Move Piston cylinder to the rear dead center position (Fig. 26).

5) Remove Swash bearing section from Inner housing by pulling in the direction of the arrow (Fig. 27).

Fig. 26

Piston cylinder

Swash bearing section

6) Remove Ball bearing 606ZZ from Gear housing complete using the removed Swash bearing section as a jig as follows;

Insert Cam shaft of Swash bearing section into the Ball bearing again. Tilt the Ball bearing a little bit by moving swash

bearing section as illustrated to left in Fig. 28. Ball bearing 606ZZ can now be removed by lightly tapping the edge of

Gear housing complete with plastic hammer as illustrated to right in Fig. 28.

Fig. 28

7) Remove Ring 8 using 1R022, 1R023 and 1R281 as illustrated in Fig. 29.

8) Remove Ball bearing 608ZZ using 1R269. Flat washer 8 and Bearing retainer can now be removed by hand (Fig. 30).

Fig. 29

1R022

Ring 8

Ball bearing

608ZZ

Piston cylinder

in the rear dead center position

Gear housing

complete

Swash bearing section

used as a jig

Fig. 27

Swash bearing section

Ball bearing 606ZZ

Fig. 30

1R269

1R281

Ball bearing

1R023

608ZZ

P 9/14

Inner housing

Flat washer 8

Bearing

retainer