Makita BJN160 Teknik Bilgiler - Sayfa 8
Elektrikli Alet Makita BJN160 için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita BJN160 8 sayfaları. Cordless nibbler
Ayrıca Makita BJN160 için: Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (11 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
W
iring diagram
Fig. D-3
Switch button
Fig. D-4
Pass Lead wires of Controller
through the space between
Housing L and Controller.
Terminal
Connect Flag connectors
so that their wire connecting
portions are located over
the mark of + - poles.
Wiring to Switch
Connect Insulated terminals to Switch while facing their wire
connecting portions to the opposite side of Switch button.
Wiring in Housing L
Lead wires of Controller
Switch
Controller
Line filter
Put Line filter in the
space as drawn above
if it is used.
Wire connecting portions
Wire connecting portions
of Insulated terminal
Set Switch to Housing L as follows:
* Face Switch button to Controller side.
* Face Insulated terminals connected side
(See Fig. 3D.) to Housing L.
Endbell complete
LED Circuit
Lead wire holder
Guide lead wires of LED circuit
along the wall side of Housing L
as drawn above. And then fix
the wires with Lead wire holder.
P 8/ 8