ALIBI ALI-NS4018R Hızlı Kurulum Kılavuzu - Sayfa 2

IP Kamera ALIBI ALI-NS4018R için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. ALIBI ALI-NS4018R 4 sayfaları. Ip bullet cameras

Sayfayı Yazdır

Step 1.

Install the Alibi Discovery Tool software

Alibi Discovery Tool is a software utility used to "discover" Alibi cameras and NVRs/DVRs installed on

the physical Ethernet network (LAN) and change their network settings. Discovery Tool is provided in

the Alibi Power Tools software suite available for download from AlibiSecurity.com/resources. It

should be installed on a Window PC attached to the same LAN as your camera. To install the Alibi Power

Tools suite and use the Discovery Tool:

Download the Alibi Power Tools installer file and user manual from AlibiSecurity.com/

resources.

Copy the installer file to a Windows PC that is attached to the same Ethernet network your

camera is installed on.

Install Alibi Power Tools. Refer to the ALIBI™ Power Tools Installation and User Manual. When the

program opens, the following screen appears.

Double click on the Discovery Tool icon. The tool will automatically discover Alibi cameras and

recorders installed on the network. For example, in the example below, Discovery found the

ALI-NS4015R camera.

Notice that the IP address of the camera is 192.168.1.64 (default IP address), and the camera

Security is Inactive. The camera must be "activated" before it can be used.

If an Alibi digital video recorder exists on the same LAN as the camera, the recorder may automatically

activate the camara, assigning the same admin user password setup in the recorder to the admin user

NOTE

of the camera, and configure the network settings to be compatible with the LAN and the recorder. If

this occurred automatically, skip this step and the nest step of this procedure.

To Activate the camera:

Click on the camera entry in the Online Devices list to select it. The Network Parameters

and other device information will appear in the right column.

Enter a "strong" password in the New Password and Confirm Password fields. Strong

passwords have: 8 to 16 characters and include at least one character from two of the

following groups: uppercase, lower case, numbers and special characters.

Click OK to set the new password. The Security status should change to Active.

To change the network settings of the camera to be compatible with the LAN where it is

installed, do the following:

www.observint.com

Enter new

password in

the New and

Confirm fields

Click on the new camera to highlight it.

In the right frame, click the box to Enable DHCP to acquire network settings from a

DHCP server on the network, or enter a new IP address, Subnet Mask, and Gateway that is

compatible with your LAN (see below).

Enter the password for the camer ain the password field, and then click Save. If the new

settings were applied, the following window will appear.

If the window above didn't appear, use the information provided to adjust the parameters,

and then Save the settings.

Close the Discovery tool and Alibi Power Tools.

Step 2.

To access the camera from a computer on the LAN:

Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of

the camera in the URL field. In the example below, the IP address of the camera is 192.168.3.111.

In the login window, enter admin for the User Name and the password you created in the

Password field, the click Login.

If this is the first time you are logging into a camera, you may see the message in the following

screen. If this appears, follow the sub-steps below.

Password field