Makita BTD136 Teknik Bilgiler - Sayfa 7
Elektrikli Alet Makita BTD136 için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Makita BTD136 13 sayfaları.
Sayfayı Yazdır
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Mounting Hammer case section and Motor section to Housing (L)
ASSEMBLING
Follow the instructions in Fig. 17 when mounting Hammer case section and Motor section to Housing (L).
Fig. 17
Make sure that the ribs of Housing (L) is
fitted tightly in the groove of Baffle plate.
rib of Housing (L)
Baffle plate
rib of Housing (L)
Flat side of Baffle plate
must be placed on the
rear side of the machine.
[3] -4. Mounting Switch Plate Complete and Switch to Housing (L)
ASSEMBLING
Follow the instructions in Fig. 18 when mounting Switch plate complete and Switch to Housing (L).
Fig. 18
Mount Switch plate complete to Housing (L)
with its "Hammer & Screw" symbol on the
Housing (L) side.
Switch plate
complete
Housing (L)
groove
Engage the prong portion of F/R
Change lever with the projection of
Switch when assembling them
together.
projection
"Hammer
Screw"
&
symbol
Baffle plate
Mount Hammer case section to Housing (L)
with the stopper projection on the Switch side.
Baffle plate
Switch
F/R Change lever
prong portion
stopper projection of
Hammer case complete
When mounting Switch to
Housing (L), press down Switch
at right angle to Housing (L)
so as not to slide the seal out of
place.
Switch
seal
P 7/13