Garde 181KS3STG Kullanıcı Kılavuzu - Sayfa 2
Aksesuarlar Garde 181KS3STG için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Garde 181KS3STG 3 sayfaları. 3 stage electric knife sharpener
Sayfayı Yazdır
Safety Precautions
When using electrical appliances, basic safety precautions should always be followed including the following:
•
Check to make sure your home or business voltage conforms to the rated voltage of the appliance.
•
Always place the appliance on a table or sturdy surface.
•
Store the appliance out of reach of children to avoid any potential accidents.
•
Store the appliance in a dry space away from any humidity.
•
Clean the appliance after each use.
Warnings
•
DO NOT sharpen any blades that do not fit within the appliance in order to avoid damage to the appliance
and/or blade.
•
DO NOT attempt to sharpen knives coated in food, fat, cooking oils, or residues. Knives must be clean and
dry prior to sharpening.
•
DO NOT leave the appliance running unattended.
•
DO NOT place the appliance in water or any other liquid.
•
DO NOT use harsh cleaners or scrubbing pads when cleaning the surface of the appliance.
•
DO NOT allow the power cord to hang over any hot surfaces.
DO NOT use the appliance if the power cord or any part has been damaged. Damages should be fixed by a
•
technician in order to avoid potential accidents.
DO NOT use the appliance for anything outside of its intended purpose. Doing so will void the warranty.
•
•
The Garde 2 Stage knife sharpener is NOT recommended for use with serrated knives.
DO NOT use any lubricants with this appliance.
•
Getting to Know Your Garde 3 Stage Knife Sharpener
The Garde 3 stage knife sharpener is perfectly designed to sharpen a variety of knives with straight and serrat-
ed edges. The 3 stage sharpening system begins with a coarse sharpening stage, equipped with 100% diamond
abrasive discs to create the ideal bevel and burr. After only a few strokes, your knife is ready for the second stage of
sharpening. In Stage 2, a higher grit of 100% diamond abrasives creates a finer micro-bevel and burr and prepares
your knife for the final polishing/stropping stage. In Stage 3, flexible resin sharpening disks straighten and polish
your knife's blade, fine-tuning the bevel and burr created in the coarse and fine grinding stages. Combined, the 3
stages result in an extremely sharp edge that is ready to withstand the rigors of your busy kitchen.