Makita BTM50 Kullanım Kılavuzu - Sayfa 10

Elektrikli Alet Makita BTM50 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita BTM50 12 sayfaları. Cordless multi tool
Ayrıca Makita BTM50 için: Teknik Bilgiler (10 sayfalar)

Sayfayı Yazdır
NOTE:
Using
a
test
•
recommendable to determine a correct orbital
stroke rate suitable for your work.
Use a sanding paper with the same grit until
•
sanding the whole workpiece is completed.
Replacing a sanding paper with different grit
sanding paper may not get a fine finish.
Dust extraction attachment
(optional accessory)
8
2
3
1. Nozzle band
2. Dust nozzle
3. Dust nozzle
4. Dust attachment
5. Felt ring
6. Pad
7. Application tool installation bolt
8. Holes in the tool
9. Protrusions on the nozzle band
012778
Install dust nozzles and dust attachment.
•
Install the nozzle band on the tool so that its
•
protrusions fit in the holes in the tool to secure it.
Put the felt ring and the sanding pad on the dust
•
attachment and then secure them with the
application tool installation bolt.
material
sample
to
1
4
try
is
012800
When you wish to perform cleaner operation, connect a
vacuum cleaner to your tool. Connect a hose of vacuum
cleaner to the dust extraction attachment (optional
accessory).
9

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Never use gasoline, benzine, thinner, alcohol or the
5
•
like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
6
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
7
Makita Authorized Service Centers, always using Makita
replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
These
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Segment saw blade
•
Round saw blade
•
Plunge cut saw blade
•
Scraper (rigid)
•
Scraper (flexible)
•
Serrated seg blade
•
General joint cutter
•
HM remover
•
HM seg saw blade
•
10
accessories
or
attachments
persons.
Only use
are
accessory or