HIKVISION DS-8100-S Series Kurulum Kılavuzu - Sayfa 2
DVR HIKVISION DS-8100-S Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. HIKVISION DS-8100-S Series 4 sayfaları.
Ayrıca HIKVISION DS-8100-S Series için: Hızlı Başlangıç Kılavuzu (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar)
Sayfayı Yazdır
Rear Panel Diagram
No.
Item
VIDEO IN
1
AUDIO IN
VIDEO
SPOT
2
OUT
VIDEO OUT
3
AUDIO OUT
4
LINE IN
5
VGA
6
RS232
7
LAN Interface
8
USB Interface
Matching Resistor
9
Switch(SW)
RS-485 Interface
Controller port
10
ALARM IN
ALARM OUT
11
GROUND
12
POWER
2
Installation Guide - DS-8100-S Series DVR
Description
BNC connectors for analog video input.
BNC connectors for analog audio input.
BNC connector for monitor. Single window view.
This interface is set to not function
BNC connector for audio output. This connector is synchronized with VIDEO OUT.
BNC connector for audio input.
VGA output. Display local video output and menu.
DB9 connector for RS232.
Connector for LAN (Local Area Network)
Connector for USB devices.
Terminal matching resistor switch for 485 bus, and its upwards (default) means cut off the resistor,
its downwards means connecting a 120 ohm resistor.
Connector for RS-485 devices. T+, T- pin connects to PTZ.
D+, D- pin connects to Ta, Tb pin of controller. For cascading devices, the first DVR's D+, D- pin
should be connected with the D+, D- pin of the next DVR.
Connector for alarm input.
Connector for alarm output.
Ground(needs to be connected when DVR startup)
AC 100~240V