Makita BTW070 Kullanım Kılavuzu - Sayfa 8
Elektrikli Alet Makita BTW070 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita BTW070 16 sayfaları.
Ayrıca Makita BTW070 için: Teknik Bilgiler (6 sayfalar), Kullanım Kılavuzu (12 sayfalar)
Sayfayı Yazdır
ASSEMBLY
1
2
1. Socket
2. Anvil
OPERATION
8
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before carrying out any
work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
Installing or removing socket
001265
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
[*1] Presetting number of impacts is impossible for more than
200 impacts (4 seconds).
[*2] Fastening time includes when you pull the trigger com-
pletely.
CAUTION:
•
Hold the tool firmly and place the socket over the bolt or
nut. Turn the tool on and fasten for the proper fastening
time and number of impacts (presetting number).
•
If the tool is operated continuously until the battery
cartridge has discharged, allow the tool to rest for 15
minutes before proceeding with a fresh battery.