Avanti WC52SS Kullanım Kılavuzu - Sayfa 10
Şarap Soğutucu Avanti WC52SS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Avanti WC52SS 20 sayfaları. Avanti products
Sayfayı Yazdır INSTALLING THE STAINLESS STEEL HANDLE
This wine cellar includes a stainless steel handle that is not required to operate this unit.
To install the handle please follow the below instructions:
1. Install the handle with the two stainless screws provided with unit. Tighten the screws using a
Phillips head screwdriver until the handle sets both flush and secured against the door frame.
(DO NOT overtighten as this will cause damage to the handle assembly). See figure below.
2. Insert the stainless steel decorative screws on the opposite side and secure by tightening with
the hex wrench provided.
3. If you desire to reverse the opening of the door, please call service as indicated on page 8.
Tools Required :
1
Handle
2
Screws (2 pieces)
3
Phillips Head Screw Driver (not
included)
4
Decorative Plugs
(2 pieces)
5
Hex / Allen Wrench
(included)
10