Gardeline GL 480 SP Hızlı Başlangıç Kılavuzu - Sayfa 17

Çim Biçme Makinesi Gardeline GL 480 SP için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Gardeline GL 480 SP 19 sayfaları.

Sayfayı Yazdır

Operator Manual

4. ROUTINE MAINTENANCE

MPORTANT – Regular, careful

maintenance is essential for keeping the

safety level and original performance of

the machine unchanged in time. Store

the lawnmower in a dry place.

1) Wear strong working gloves during any

cleaning, maintenance or adjustment

operation on the machine.

2) Carefully clean the machines with

water after each cut; remove the grass

debris and mud accumulated insidethe

chassis to avoid their drying and thus

making the next start-up difficult.

3) The paintwork on the inside of the

chassis may peel off in time due to the

abrasive action of the cut grass; in this

case, intervene promptly by touching up

the paintwork using a rustproof

paint to prevent the formation of rust that

would lead to corrosion of the metal.

4) Should it be necessary to access the

lower part, only tilt the machine from by

lowering the handles to the ground and

raising the front of the mower. DO NOT

tilt the mower onto its side.

5) Do not drip petrol onto the plastic

parts of the motor or the machine to

prevent damaging them and remove all

traces of spilt petrol immediately. The

warranty does not cover damage to

plastic parts caused by petrol.

4.1 All operations on the blade should be

carried out at a specialized centre. Note

for specialized centres: Reassemble the

blade (2) as shown in the drawing and

tighten the central screw (1) using a

torque wrench set to 35-40 Nm.

4.2 In power-driven models:

• adjust the tension of the belt with the

nut (1) to get the right measurement

(6 mm).

• turn the adjusting nut (2) so that the

wire (3) is slightly loose and the lever

(4) is idle.

HELPLINE UK NO. 0845 600 2912

WEB SUPPORT www.mowerfix.info

MODEL NUMBER: GL480 SP

4.3 To recharge a flat battery, connect to

the battery charger (1) following the

instructions in the battery maintenance

handbook. Do not connect the battery

charger directly to the engine terminal. It

is not possible to start theengine using

the battery charger as a power source, as

it may get damaged. If the machine is to

remain inactive for a long period,

disconnectthe battery leads after making

sure that the battery is fully charged.

Should you have any doubts or problems,

do not hesitate to contact your nearest

Service Centre or your Dealer.

IMPORTANT:

Before starting the for the first time, carefully

read the instructions as set out in the engine

handbook.

CAUTION!

Check oil level before starting.