HIKVISION DS-9016HUHI-F8/N Hızlı Başlangıç Kılavuzu - Sayfa 10

DVR HIKVISION DS-9016HUHI-F8/N için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. HIKVISION DS-9016HUHI-F8/N 17 sayfaları.

1 1

A D D A N A L O G C A M E R A S ( c o n t i n u e d )





V I E W L I V E V I D E O

Live View displays real-time video.

S E T U P R E C O R D I N G

The system defaults to record video continuously at 8 fps, or at 15 fps when motion is detected.

 Recording Schedule

Default is to record continuously every day. Do the following to change the recording schedule:

1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.

2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.

3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect

(days will turn gray [off]) the calendar days you wish to record.

4. Apply time settings as desired.

5. Press APPLY.

Disable analog cameras in the Analog Cameras Enable Status section:

• Uncheck the camera checkbox of any camera(s) you wish to disable.

• Check the Analog checkbox to disable/enable all analog cameras.

Press APPLY to save settings.







Icons in the upper right of screen show

each camera's record and alarm status.

• Alarm (video loss, tampering, motion

detection, sensor alarm, or VCA

alarm)

• Record (manual record, continuous

record, motion detection, alarm, or

VCA triggered record)

• Event/Exception (event and

exception information appears at

lower-left corner of screen)

CAMERA LIST (Analog)

 STATUS

Camera enabled or disabled

ENABLE

Check checkbox to enable camera

ANALOG

Enable/disable all analog cameras

APPLY

Click to accept settings